Idea
In short
How do you build a BLE sensor beacon?
An HM-10 module advertises temperature and humidity so a phone app can read them without pairing. You need Arduino Nano, HM-10 BLE module, DHT22 Sensor, 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Send data over BLE with a simple module.
Parts list
- Development Boards
- Wireless
- Sensors
- Batteries
- Power
How to build it
- Wire the HM-10 on serial
- Set the name
- Notify temperature and humidity every 10 seconds
- Read it with a free BLE scanner
- Measure the battery life
Common questions
What parts do I need for the BLE sensor beacon?
Arduino Nano, HM-10 BLE module, DHT22 Sensor, 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
How long does the BLE sensor beacon take to build?
About 120 minutes for a intermediate maker.
