Idea
In short
How do you build a room sensor hub over radio?
Two small radio nodes send temperature and light readings to a hub that shows the latest values, with simple retries on loss. You need Arduino Nano × 2, nRF24L01+ Radio Module × 2, DHT22 Sensor, LDR Photoresistor, Resistor 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Collect remote readings by radio.
Parts list
- Development BoardsArduino Nano × 2
- Wireless
- Sensors
- Sensors
- Passives
- Displays
- Prototyping
How to build it
- Wire each radio with a stable supply
- Define a packet format
- Send readings with an ID
- Retry on missed acknowledgement
- Show the latest value per node
Common questions
What parts do I need for the room sensor hub over radio?
Arduino Nano × 2, nRF24L01+ Radio Module × 2, DHT22 Sensor, LDR Photoresistor, Resistor 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
How long does the room sensor hub over radio take to build?
About 360 minutes for a advanced maker.
