Idea
In short
How do you build a basic logic analyser with an Arduino?
Capture a few digital channels at modest speeds and view them as waveforms on a computer. You need Arduino Uno R3, USB to TTL serial adapter (CP2102), Resistor 1 kΩ × 4, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Advanced
- Time
- About 300 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Sample digital lines and plot them.
Parts list
- Development Boards
- Interfaces
- PassivesResistor 1 kΩ × 4
- Prototyping
- Prototyping
How to build it
- Sample four pins into a buffer
- Send data to a PC
- Draw the waveforms
- Add a trigger
- Test on a known clock
Common questions
What parts do I need for the basic logic analyser with an Arduino?
Arduino Uno R3, USB to TTL serial adapter (CP2102), Resistor 1 kΩ × 4, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the basic logic analyser with an Arduino take to build?
About 300 minutes for a advanced maker.
