Idea
In short
How do you build a first I2C capture?
Capture the I2C traffic between a board and a display with an eight-channel logic analyser, and read the address and data bytes. You need Logic analyser 8-channel 24 MHz, Arduino Nano, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a bus with a logic analyser.
Parts list
- Interfaces
- Development Boards
- Displays
- Prototyping
How to build it
- Hook up the probes
- Run a display sketch
- Capture a trace
- Decode the bytes
- Find the address
Common questions
What parts do I need for the first I2C capture?
Logic analyser 8-channel 24 MHz, Arduino Nano, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the first I2C capture take to build?
About 180 minutes for a intermediate maker.
