Idea
In short
How do you build an inverting amplifier with a 741?
A classic 741 inverting amplifier built from two resistors, with gain measured at three input levels. You need LM741 op-amp, Resistor 1 kΩ, Resistor 10 kΩ, Potentiometer 10 kΩ, 9 V battery × 2, 9 V battery snap with DC jack × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a classic op-amp stage.
Parts list
- Integrated Circuits
- Passives
- Passives
- Passives
- Batteries9 V battery × 2
- Power
- Prototyping
How to build it
- Wire two 9 V batteries as plus and minus
- Build the stage
- Set the input with the pot
- Measure output at three levels
- Note where it clips
Common questions
What parts do I need for the inverting amplifier with a 741?
LM741 op-amp, Resistor 1 kΩ, Resistor 10 kΩ, Potentiometer 10 kΩ, 9 V battery × 2, 9 V battery snap with DC jack × 2 and Breadboard 830 Tie Points.
How long does the inverting amplifier with a 741 take to build?
About 180 minutes for a intermediate maker.
