Idea
In short
How do you build a tone detector?
An LM567 lights an LED only when it hears a particular tone, the heart of many remote controls. You need LM567 tone decoder, Ceramic Capacitor 100 nF × 2, Electrolytic capacitor 10 µF, Potentiometer 10 kΩ, LED 5 mm red, MAX4466 microphone module, Breadboard 830 Tie Points, 9 V battery and 9 V battery snap with DC jack.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a tone decoder IC.
Parts list
- Integrated Circuits
- Passives
- Passives
- Passives
- Semiconductors
- Sensors
- Prototyping
- Batteries
- Power
How to build it
- Set the centre frequency with the resistor and capacitor
- Apply a tone from a phone
- Watch the output
- Find the lock range
- Detect the tone in a noisy room
Common questions
What parts do I need for the tone detector?
LM567 tone decoder, Ceramic Capacitor 100 nF × 2, Electrolytic capacitor 10 µF, Potentiometer 10 kΩ, LED 5 mm red, MAX4466 microphone module, Breadboard 830 Tie Points, 9 V battery and 9 V battery snap with DC jack.
How long does the tone detector take to build?
About 120 minutes for a intermediate maker.
