Projects / Ideas / Pocket guitar amplifier

Pocket guitar amplifier

IntermediateAudio & MusicIdeaReviewed
In short

How do you build a pocket guitar amplifier?

An LM386 amplifier drives a small speaker from a guitar, with a volume knob, battery power and a case. You need LM386 audio amplifier IC, Speaker 8 Ω 0.5 W, Potentiometer 10 kΩ, Electrolytic capacitor 220 µF × 2, Electrolytic capacitor 10 µF, Ceramic Capacitor 100 nF, Audio jack 3.5 mm (PCB, stereo), 9 V battery and 9 V battery snap with DC jack.

Level
Intermediate
Time
About 120 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a simple audio power amplifier.

How to build it

  1. Wire the LM386 with a gain of 20
  2. Add the input volume pot
  3. Add the output capacitor and Zobel network
  4. Test with a phone
  5. Put it in a box with a jack

Related projects

Common questions

What parts do I need for the pocket guitar amplifier?

LM386 audio amplifier IC, Speaker 8 Ω 0.5 W, Potentiometer 10 kΩ, Electrolytic capacitor 220 µF × 2, Electrolytic capacitor 10 µF, Ceramic Capacitor 100 nF, Audio jack 3.5 mm (PCB, stereo), 9 V battery and 9 V battery snap with DC jack.

How long does the pocket guitar amplifier take to build?

About 120 minutes for a intermediate maker.