Idea
In short
How do you build a pocket amplifier?
An amplifier chip drives a small speaker from a phone or a microphone, in a tin or a box. You need LM386 audio amplifier IC, Speaker 8 Ω 0.5 W, Electrolytic capacitor 220 µF, Electrolytic capacitor 10 µF, Ceramic Capacitor 100 nF, Potentiometer 10 kΩ, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a small audio power amplifier.
Parts list
- Integrated Circuits
- Motors & Actuators
- Passives
- Passives
- Passives
- Passives
- Batteries
- Power
- Prototyping
How to build it
- Wire the amplifier with the datasheet gain
- Add the input volume pot
- Add the output capacitor
- Test with a phone
- Add a power switch
Common questions
What parts do I need for the pocket amplifier?
LM386 audio amplifier IC, Speaker 8 Ω 0.5 W, Electrolytic capacitor 220 µF, Electrolytic capacitor 10 µF, Ceramic Capacitor 100 nF, Potentiometer 10 kΩ, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
How long does the pocket amplifier take to build?
About 150 minutes for a beginner maker.
