Idea
In short
How do you build a four jobs on one op-amp chip?
Use the four amplifiers in one chip as a buffer, a gain stage, a filter and a comparator, passing a signal through all four. You need LM324 quad op-amp, Resistor 10 kΩ × 6, Resistor 100 kΩ × 2, Ceramic Capacitor 100 nF, Potentiometer 10 kΩ, 9 V battery × 2, 9 V battery snap with DC jack × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a signal chain on one chip.
Parts list
- Integrated Circuits
- PassivesResistor 10 kΩ × 6
- PassivesResistor 100 kΩ × 2
- Passives
- Passives
- Batteries9 V battery × 2
- Power
- Prototyping
How to build it
- Read the quad pinout
- Wire the buffer
- Add the gain stage
- Add the low-pass filter
- Finish with the comparator
Common questions
What parts do I need for the four jobs on one op-amp chip?
LM324 quad op-amp, Resistor 10 kΩ × 6, Resistor 100 kΩ × 2, Ceramic Capacitor 100 nF, Potentiometer 10 kΩ, 9 V battery × 2, 9 V battery snap with DC jack × 2 and Breadboard 830 Tie Points.
How long does the four jobs on one op-amp chip take to build?
About 210 minutes for a intermediate maker.
