Projects / Ideas / Frequency to voltage tachometer

Frequency to voltage tachometer

IntermediateAnalog CircuitsIdeaReviewed
In short

How do you build a frequency to voltage tachometer?

An LM2907 converts pulses from a motor sensor into a voltage that drives a panel meter. You need LM2907 frequency to voltage converter, Slotted optical switch (H21A1), DC motor 130 size (toy motor), Potentiometer 10 kΩ, Ceramic Capacitor 100 nF, Electrolytic capacitor 1 µF and Voltage sensor module (0 to 25 V).

Level
Intermediate
Time
About 150 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Convert frequency to voltage.

How to build it

  1. Wire the input and charge pump
  2. Set the full scale with the resistor
  3. Read the voltage
  4. Calibrate against a phone tachometer
  5. Add a meter

Related projects

Common questions

What parts do I need for the frequency to voltage tachometer?

LM2907 frequency to voltage converter, Slotted optical switch (H21A1), DC motor 130 size (toy motor), Potentiometer 10 kΩ, Ceramic Capacitor 100 nF, Electrolytic capacitor 1 µF and Voltage sensor module (0 to 25 V).

How long does the frequency to voltage tachometer take to build?

About 150 minutes for a intermediate maker.