Projects / Ideas / Frequency to voltage lab

Frequency to voltage lab

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a frequency to voltage lab?

A converter chip turns a pulse rate into a voltage. A second output of the same board makes the test pulses, so you can plot voltage against frequency. You need Arduino Nano, LM2907 frequency to voltage converter, Resistor 10 kΩ, Resistor 100 kΩ, Ceramic Capacitor 100 nF, Electrolytic capacitor 10 µF, Potentiometer 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Turn frequency into a voltage.

How to build it

  1. Generate a test frequency
  2. Wire the converter
  3. Read the voltage
  4. Plot against frequency
  5. Find the linear range

Related projects

Common questions

What parts do I need for the frequency to voltage lab?

Arduino Nano, LM2907 frequency to voltage converter, Resistor 10 kΩ, Resistor 100 kΩ, Ceramic Capacitor 100 nF, Electrolytic capacitor 10 µF, Potentiometer 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the frequency to voltage lab take to build?

About 270 minutes for a intermediate maker.