Idea
In short
How do you build a regulator dropout test?
A linear regulator is tested with falling input voltage to find the dropout point. You need 7805 voltage regulator, Potentiometer 10 kΩ, Resistor 330 Ω and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Find when a regulator stops regulating.
Parts list
- Power
- Passives
- Passives
- Prototyping
How to build it
- Build a 5 V regulator
- Vary the input with a pot and supply
- Measure the output
- Note the dropout voltage
- Compare with the datasheet
Common questions
What parts do I need for the regulator dropout test?
7805 voltage regulator, Potentiometer 10 kΩ, Resistor 330 Ω and Breadboard 830 Tie Points.
How long does the regulator dropout test take to build?
About 150 minutes for a intermediate maker.
