Projects / Ideas / Adjustable buck supply with an LM2576

Adjustable buck supply with an LM2576

IntermediatePowerIdeaReviewed
In short

How do you build an adjustable buck supply with an LM2576?

An LM2576 steps down a 12 to 24 V source to an adjustable output, with an inductor and heat sink. You need LM2576 buck regulator IC, Inductor 33 µH power (CD54), Schottky Diode 1N5819, Electrolytic capacitor 470 µF × 2, Potentiometer 10 kΩ and Heatsink TO-220.

Level
Intermediate
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build an efficient step-down regulator.

How to build it

  1. Choose the output voltage divider
  2. Place the parts with short loops
  3. Measure the output and ripple
  4. Test the efficiency under load
  5. Add a fuse

Related projects

Common questions

What parts do I need for the adjustable buck supply with an LM2576?

LM2576 buck regulator IC, Inductor 33 µH power (CD54), Schottky Diode 1N5819, Electrolytic capacitor 470 µF × 2, Potentiometer 10 kΩ and Heatsink TO-220.

How long does the adjustable buck supply with an LM2576 take to build?

About 180 minutes for a intermediate maker.