Idea
In short
How do you build a bicycle speedometer?
A reed switch on the fork and a magnet on the spoke measure speed and distance. You need Arduino Nano, Door reed switch MC-38, Resistor 10 kΩ, 0.96 inch OLED SPI (SSD1306, 7-pin), Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compute speed from wheel pulses.
Parts list
- Development Boards
- Sensors
- Passives
- Displays
- Batteries
- Power
- Prototyping
How to build it
- Mount the magnet and switch
- Measure pulse intervals
- Convert with wheel size
- Show speed and trip distance
- Save the total in EEPROM
Common questions
What parts do I need for the bicycle speedometer?
Arduino Nano, Door reed switch MC-38, Resistor 10 kΩ, 0.96 inch OLED SPI (SSD1306, 7-pin), Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
How long does the bicycle speedometer take to build?
About 210 minutes for a intermediate maker.
