Projects / Ideas / Component bench test routine

Component bench test routine

BeginnerHome LabIdeaReviewed
In short

How do you build a component bench test routine?

A checklist and test jig for sorting a bag of mixed parts with an LCR tester and a multimeter. You need LCR / component tester (ESR, transistor), Digital multimeter, Breadboard 830 Tie Points, Jumper wires male to male (40 pcs, 20 cm) and Solderless breadboard wires with clips (test hooks).

Level
Beginner
Time
About 120 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Develop a repeatable component testing routine.

How to build it

  1. Sort parts by type
  2. Test resistors and note tolerance
  3. Test capacitors for value and ESR
  4. Test diodes and transistors
  5. Record results in a table

Related projects

Common questions

What parts do I need for the component bench test routine?

LCR / component tester (ESR, transistor), Digital multimeter, Breadboard 830 Tie Points, Jumper wires male to male (40 pcs, 20 cm) and Solderless breadboard wires with clips (test hooks).

How long does the component bench test routine take to build?

About 120 minutes for a beginner maker.