Projects / Ideas / LC resonance lab

LC resonance lab

IntermediateAnalog CircuitsIdeaReviewed
In short

How do you build an LC resonance lab?

A small coil and a capacitor form a tuned circuit, and a scope shows the peak at the resonant frequency you calculated. You need Inductor 10 µH (radial), Ceramic Capacitor 100 nF, Resistor 1 kΩ, Function generator (DDS), USB oscilloscope / handheld scope (DSO138) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Find a resonant peak.

How to build it

  1. Calculate the frequency
  2. Wire the series circuit
  3. Sweep the generator
  4. Find the peak
  5. Compare with the calculation

Related projects

Common questions

What parts do I need for the LC resonance lab?

Inductor 10 µH (radial), Ceramic Capacitor 100 nF, Resistor 1 kΩ, Function generator (DDS), USB oscilloscope / handheld scope (DSO138) and Breadboard 830 Tie Points.

How long does the LC resonance lab take to build?

About 210 minutes for a intermediate maker.