Idea
In short
How do you build an eight-bit latch memory demo?
Switches set a byte and a latch holds it on LEDs after you release the switches. You need 74HC573 octal latch, DIP switch 8-position, Tactile push button 6 mm, LED 5 mm red × 8, Resistor 220 Ω × 8, Resistor 10 kΩ × 9 and Breadboard 830 Tie Points × 2.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See how a latch stores data.
Parts list
- Integrated Circuits
- Switches
- Switches
- SemiconductorsLED 5 mm red × 8
- PassivesResistor 220 Ω × 8
- PassivesResistor 10 kΩ × 9
- Prototyping
How to build it
- Set a byte on switches
- Pulse the latch enable
- Change the switches
- Show the held value
- Compare with live mode
Common questions
What parts do I need for the eight-bit latch memory demo?
74HC573 octal latch, DIP switch 8-position, Tactile push button 6 mm, LED 5 mm red × 8, Resistor 220 Ω × 8, Resistor 10 kΩ × 9 and Breadboard 830 Tie Points × 2.
How long does the eight-bit latch memory demo take to build?
About 210 minutes for a intermediate maker.
