Idea
In short
How do you build a gyro drift log?
Leave a gyroscope still on the bench and log its reading for an hour to see the zero offset and how it drifts with warm-up. You need Arduino Nano, L3G4200D gyroscope, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See gyro offset and drift.
Parts list
- Development Boards
- Sensors
- Interfaces
- Sensors
- Prototyping
How to build it
- Wire the gyro on I2C
- Read the three rates
- Log once a second
- Average to find the offset
- Plot the drift
Common questions
What parts do I need for the gyro drift log?
Arduino Nano, L3G4200D gyroscope, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.
How long does the gyro drift log take to build?
About 180 minutes for a intermediate maker.
