Projects / Ideas / Stepper motor analog clock hand

Stepper motor analog clock hand

IntermediateMotionIdeaReviewed
In short

How do you build a stepper motor analog clock hand?

A geared stepper moves a paper hand around a dial and keeps time with a real-time clock. You need Arduino Nano, 28BYJ-48 Stepper Motor, DS3231 RTC module, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drive a small stepper accurately.

Parts list

How to build it

  1. Drive the stepper in half steps
  2. Set steps per minute
  3. Home with a button
  4. Read the real-time clock
  5. Correct drift

Related projects

Common questions

What parts do I need for the stepper motor analog clock hand?

Arduino Nano, 28BYJ-48 Stepper Motor, DS3231 RTC module, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the stepper motor analog clock hand take to build?

About 240 minutes for a intermediate maker.