Idea
In short
How do you build a tremor and footstep logger?
An analogue accelerometer on a table logs small vibrations from footsteps and doors, to show how much a floor moves. You need Arduino Nano, ADXL335 analog accelerometer, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Log small vibrations.
Parts list
- Development Boards
- Sensors
- Interfaces
- Sensors
- Prototyping
How to build it
- Mount the sensor flat on the floor
- Find the zero level
- Log the peaks each second
- Walk past at different distances
- Plot the peaks
Related projects
Common questions
What parts do I need for the tremor and footstep logger?
Arduino Nano, ADXL335 analog accelerometer, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.
How long does the tremor and footstep logger take to build?
About 180 minutes for a intermediate maker.
