Idea
In short
How do you build a gyro turn counter?
A gyroscope board adds up rotation to count full turns of a rotating stand and shows the heading in degrees. You need Arduino Nano, L3G4200D gyroscope, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count turns with a gyroscope.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Wire the board
- Find the zero offset
- Add up the rotation
- Count each full turn
- Reset with a button
Common questions
What parts do I need for the gyro turn counter?
Arduino Nano, L3G4200D gyroscope, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the gyro turn counter take to build?
About 210 minutes for a intermediate maker.
