L3G4200D gyroscope
3-axis gyroscope on GY-50 modules.
MeasuresAngular rate
Range±250 to ±2000 °/s
InterfaceI2C or SPI
Supply voltage2.4 to 3.6 V
SensorsReviewedMPN L3G4200DUsed in 2 projects
In short
What is the L3G4200D gyroscope and what is it used for?
3-axis gyroscope on GY-50 modules. Makers use it for rotation sensing.
How it works
A MEMS vibrating structure senses rotation through the Coriolis effect.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Angular rate |
| Range | ±250 to ±2000 °/s |
| Interface | I2C or SPI |
| Supply voltage | 2.4 to 3.6 V |
Pinout
VCC3.3 to 5 V on modules
GNDGround
SCLI2C or SPI clock
SDAI2C data or SPI
SDOAddress select
CSHigh for I2C
INT1 and INT2Interrupts
How to use it
An older gyroscope; for new designs, an MPU6050 gives gyro and accelerometer together. Measure and subtract its bias at start-up.
Applications
Rotation sensing
Builds that use it
Alternatives
- MPU6050 IMUGyro plus accelerometer
Common questions
What is the L3G4200D gyroscope used for?
In maker projects: rotation sensing.
How does the L3G4200D gyroscope work?
A MEMS vibrating structure senses rotation through the Coriolis effect.
What voltage does the L3G4200D gyroscope need?
2.4 to 3.6 V.
How do I connect the L3G4200D gyroscope to an Arduino or ESP32?
I2C or SPI. Pins: VCC (3.3 to 5 V on modules), GND (Ground), SCL (I2C or SPI clock), SDA (I2C data or SPI), SDO (Address select), CS (High for I2C).
What can I use instead of the L3G4200D gyroscope?
MPU6050 IMU.
