Projects / Ideas / JST-PH lead crimp practice

JST-PH lead crimp practice

BeginnerHome LabIdeaReviewed
In short

How do you build a JST-PH lead crimp practice?

Crimp five JST-PH pigtail leads with a crimp tool and check each with a pull test, a continuity test and a look at the barrel. You need Crimping tool (Dupont / JST), JST-PH 2-pin Connector, Silicone wire 22 AWG (assorted colours), Wire stripper and cutter and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 90 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make reliable crimped leads.

How to build it

  1. Strip a measured length
  2. Seat the pin in the right die
  3. Crimp the conductor barrel
  4. Crimp the insulation grip
  5. Pull test and continuity check

Related projects

Common questions

What parts do I need for the JST-PH lead crimp practice?

Crimping tool (Dupont / JST), JST-PH 2-pin Connector, Silicone wire 22 AWG (assorted colours), Wire stripper and cutter and Jumper wires male to male (40 pcs, 20 cm).

How long does the JST-PH lead crimp practice take to build?

About 90 minutes for a beginner maker.