JST-PH 2-pin Connector
Polarized connector series for matching cable/socket assemblies.
TypeWire-to-board connector
Pitch2.0 mm
Rating2 A, 100 V
Pins2
ConnectorsReviewedMPN PHR-2 / B2B-PH-K-SUsed in 1 project
In short
What is the JST-PH 2-pin Connector and what is it used for?
Polarized connector series for matching cable/socket assemblies. Makers use it for compare mating and polarity.
In the real world
Low-voltage power interconnects
How it works
Physical fit alone does not prove electrical compatibility. Verify pitch, mating type, polarity and current rating.
Key specifications
| Connector spec | Value |
|---|---|
| Type | Wire-to-board connector |
| Pitch | 2.0 mm |
| Rating | 2 A, 100 V |
| Pins | 2 |
| Used for | Li-Po batteries and small sensors |
Pinout
Pin 1Check: battery makers do not agree on which side is +
Pin 2The other conductor
How to use it
The standard plug on small Li-Po cells. Before plugging a battery into a board, check the red wire lines up with + on the board: reversed polarity is common.
Applications
Li-Po batteriesRemovable sensor cables
Builds that use it
Alternatives
- 2.54 mm Pin HeaderCheaper, larger pitch
Common questions
What is the JST-PH 2-pin Connector used for?
In products: low-voltage power interconnects. In maker projects: compare mating and polarity.
How does the JST-PH 2-pin Connector work?
Physical fit alone does not prove electrical compatibility. Verify pitch, mating type, polarity and current rating.
What can I use instead of the JST-PH 2-pin Connector?
2.54 mm Pin Header.
