Projects / Ideas / Insulated lug crimp test

Insulated lug crimp test

BeginnerHome LabIdeaReviewed
In short

How do you build an insulated lug crimp test?

Crimp ten insulated ring lugs with a ratchet crimper and compare good and bad crimps by a pull test, continuity and cross-section look. You need Ratchet crimper for insulated lugs, Silicone wire 22 AWG (assorted colours), Wire stripper and cutter, Heat shrink tubing assortment and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 90 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Judge a crimp joint.

How to build it

  1. Match the lug colour to the wire size
  2. Strip to the barrel length
  3. Crimp in the correct die
  4. Pull test each lug
  5. Record which ones pass

Related projects

Common questions

What parts do I need for the insulated lug crimp test?

Ratchet crimper for insulated lugs, Silicone wire 22 AWG (assorted colours), Wire stripper and cutter, Heat shrink tubing assortment and Jumper wires male to male (40 pcs, 20 cm).

How long does the insulated lug crimp test take to build?

About 90 minutes for a beginner maker.