IMX219 camera for Jetson Nano and Orin
8 MP camera that works with Jetson camera ports out of the box.
FunctionCamera, Sony IMX219 8 MP
InterfaceMIPI CSI-2 22-pin or 15-pin
RatingJetson drivers included in JetPack
SBC AccessoriesReviewedMPN IMX219-77Used in 17 projects
In short
What is the IMX219 camera for Jetson Nano and Orin and what is it used for?
8 MP camera that works with Jetson camera ports out of the box. Makers use it for jetson vision projects.
How it works
An 8 MP Sony IMX219 sensor with a wide lens.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Camera, Sony IMX219 8 MP |
| Interface | MIPI CSI-2 22-pin or 15-pin |
| Rating | Jetson drivers included in JetPack |
Pinout
CSI ribbon22-pin on Orin Nano kits, 15-pin on the Jetson Nano
How to use it
JetPack includes the IMX219 driver. Capture with GStreamer using nvarguscamerasrc. Use the right ribbon for your board.
Applications
Jetson vision projects
Builds that use it
Guided build
Real-time object detection on Jetson Orin Nano
Guided build
Jetson first boot and demo apps
Idea
Person-following robot
Idea
Train your own object detector
Idea
Aerial image analysis
Idea
Exercise form coach on Jetson
Idea
Number plate reader on Jetson
Idea
Factory defect detection on Jetson
Showing 8 of 17
Alternatives
- Raspberry Pi Camera Module 2Same sensor for a Pi
Common questions
What is the IMX219 camera for Jetson Nano and Orin used for?
In maker projects: jetson vision projects.
How does the IMX219 camera for Jetson Nano and Orin work?
An 8 MP Sony IMX219 sensor with a wide lens.
How do I connect the IMX219 camera for Jetson Nano and Orin to an Arduino or ESP32?
MIPI CSI-2 22-pin or 15-pin. Pins: CSI ribbon (22-pin on Orin Nano kits, 15-pin on the Jetson Nano).
What can I use instead of the IMX219 camera for Jetson Nano and Orin?
Raspberry Pi Camera Module 2.
