Idea
In short
How do you build a jetson floor finder for a robot?
A Jetson Orin Nano runs a small segmentation model on the camera view and marks which pixels are floor and which are not, so a robot could pick a clear path. Start by showing the mask on screen and measuring the frame rate before any motor is attached. You need NVIDIA Jetson Orin Nano Super Developer Kit and IMX219 camera for Jetson Nano and Orin.
- Level
- Advanced
- Time
- About 180 min
- Parts
- 2
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Find the free floor in a camera view.
Parts list
- Single Board Computers
- SBC Accessories
How to build it
- Capture camera frames
- Run a pre-trained segmentation model
- Draw the floor mask
- Measure the frame rate
- Find the widest clear column
Common questions
What parts do I need for the jetson floor finder for a robot?
NVIDIA Jetson Orin Nano Super Developer Kit and IMX219 camera for Jetson Nano and Orin.
How long does the jetson floor finder for a robot take to build?
About 180 minutes for a advanced maker.
