Idea
In short
How do you build an inductance meter with LC resonance?
An unknown inductor rings with a known capacitor, and measuring the frequency gives the inductance. You need Arduino Uno R3, LM393 Comparator, Ceramic capacitor 1 µF × 2, Signal Diode 1N4148, Resistor 330 Ω, Resistor 100 kΩ and 16x2 LCD with I2C backpack (PCF8574).
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use resonance to measure an inductor.
Parts list
- Development Boards
- Integrated Circuits
- PassivesUse a film capacitor if you have one
- Semiconductors
- Passives
- Passives
- Displays
How to build it
- Pulse the LC circuit
- Square up the ringing with the comparator
- Measure its frequency
- Work out L from f and C
- Check against known inductors
Related projects
Common questions
What parts do I need for the inductance meter with LC resonance?
Arduino Uno R3, LM393 Comparator, Ceramic capacitor 1 µF × 2, Signal Diode 1N4148, Resistor 330 Ω, Resistor 100 kΩ and 16x2 LCD with I2C backpack (PCF8574). Ceramic capacitor 1 µF × 2: Use a film capacitor if you have one.
How long does the inductance meter with LC resonance take to build?
About 120 minutes for a intermediate maker.
