Projects / Ideas / Three-channel power logger

Three-channel power logger

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a three-channel power logger?

A three-channel current monitor logs voltage and current for three small loads at once and saves them to a card. You need Arduino Nano, INA3221 3-channel current monitor, MicroSD Card Module, Resistor 100 kΩ, Resistor 330 Ω × 3, LED 5 mm white × 3 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Log the power of three loads.

Parts list

How to build it

  1. Read the three channels
  2. Add three different loads
  3. Log to the card every second
  4. Compare the three power values
  5. Plot a table in a spreadsheet

Related projects

Common questions

What parts do I need for the three-channel power logger?

Arduino Nano, INA3221 3-channel current monitor, MicroSD Card Module, Resistor 100 kΩ, Resistor 330 Ω × 3, LED 5 mm white × 3 and Breadboard 830 Tie Points.

How long does the three-channel power logger take to build?

About 210 minutes for a intermediate maker.