Idea
In short
How do you build a battery capacity tester?
A constant resistor load and an INA219 measure how many milliamp-hours an AA or 18650 cell really gives. You need Arduino Nano, INA219 Current Monitor, Power resistor 10 Ω 5 W (cement), MOSFET IRLZ44N, 16x2 LCD with I2C backpack (PCF8574) and MicroSD Card Module.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Integrate current over time to find capacity.
Parts list
- Development Boards
- Sensors
- Passives
- Semiconductors
- Displays
- Interfaces
How to build it
- Connect the load through a MOSFET switch
- Measure voltage and current
- Integrate to mAh
- Stop at the cut-off voltage
- Compare cells from different brands
Common questions
What parts do I need for the battery capacity tester?
Arduino Nano, INA219 Current Monitor, Power resistor 10 Ω 5 W (cement), MOSFET IRLZ44N, 16x2 LCD with I2C backpack (PCF8574) and MicroSD Card Module.
How long does the battery capacity tester take to build?
About 120 minutes for a intermediate maker.
