Projects / Ideas / LoRa position beacon

LoRa position beacon

AdvancedCommunicationIdeaReviewed
In short

How do you build a loRa position beacon?

A Heltec board with GPS sends its position over LoRa every minute to a receiver that shows it on an OLED. You need Heltec WiFi LoRa 32 V3 × 2, GPS module NEO-6M, 18650 cell 2600 mAh (branded) and Battery holder 18650 single.

Level
Advanced
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Send position data over a long range link.

How to build it

  1. Read NMEA sentences from the GPS
  2. Pack the position into a short message
  3. Send it every minute
  4. Show the distance and bearing on the receiver
  5. Test on a walk

Related projects

Common questions

What parts do I need for the loRa position beacon?

Heltec WiFi LoRa 32 V3 × 2, GPS module NEO-6M, 18650 cell 2600 mAh (branded) and Battery holder 18650 single.

How long does the loRa position beacon take to build?

About 210 minutes for a advanced maker.