Projects / Ideas / Build and test a dipole antenna

Build and test a dipole antenna

IntermediateCommunicationIdeaReviewed
In short

How do you build a build and test a dipole antenna?

Cut a dipole for 433 or 868 MHz and compare range and RSSI with the stock antenna. You need Heltec WiFi LoRa 32 V3 × 2, Coaxial cable RG58, SMA connector (PCB edge) and u.FL (IPEX) to SMA pigtail.

Level
Intermediate
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Understand antenna length and matching.

Parts list

How to build it

  1. Work out quarter-wave length
  2. Cut and solder the dipole
  3. Connect through a pigtail
  4. Compare RSSI with the stock antenna
  5. Try different heights

Related projects

Common questions

What parts do I need for the build and test a dipole antenna?

Heltec WiFi LoRa 32 V3 × 2, Coaxial cable RG58, SMA connector (PCB edge) and u.FL (IPEX) to SMA pigtail.

How long does the build and test a dipole antenna take to build?

About 120 minutes for a intermediate maker.