Projects / Ideas / Waterproof tank depth gauge

Waterproof tank depth gauge

IntermediateHome LabIdeaReviewed
In short

How do you build a waterproof tank depth gauge?

A waterproof ultrasonic sensor on a tank lid reports the depth of water and the volume left. You need ESP32 DevKit V1, JSN-SR04T waterproof ultrasonic sensor, SSD1306 OLED Display and 5 V 2 A USB adapter.

Level
Intermediate
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Turn distance to the water surface into volume.

How to build it

  1. Mount the sensor facing straight down
  2. Measure the empty and full distances
  3. Convert to a percentage and litres
  4. Smooth the readings
  5. Handle the sensor dead zone

Related projects

Common questions

What parts do I need for the waterproof tank depth gauge?

ESP32 DevKit V1, JSN-SR04T waterproof ultrasonic sensor, SSD1306 OLED Display and 5 V 2 A USB adapter.

How long does the waterproof tank depth gauge take to build?

About 120 minutes for a intermediate maker.