2.4 inch TFT shield for Arduino Uno
320 × 240 resistive touch screen shield with a microSD slot.
TypeColour TFT with resistive touch
Size2.4 inch
Resolution240 × 320
Driver ICILI9341 or similar (varies)
DisplaysReviewedMPN 2.4 TFT Uno shieldUsed in 1 project
In short
What is the 2.4 inch TFT shield for Arduino Uno and what is it used for?
320 × 240 resistive touch screen shield with a microSD slot. Makers use it for touch interfaces for the Uno.
How it works
A 240 × 320 TFT on an 8-bit parallel bus with a resistive touch layer.
Key specifications
| Display spec | Value |
|---|---|
| Type | Colour TFT with resistive touch |
| Size | 2.4 inch |
| Resolution | 240 × 320 |
| Driver IC | ILI9341 or similar (varies) |
| Interface | 8-bit parallel |
| Supply voltage | 5 V via the shield |
Pinout
D2 to D98-bit data bus
A0 to A4Control
D10 to D13SD card
TouchShares analog and data pins
How to use it
Use MCUFRIEND_kbv, which reads the controller ID. Run its TouchScreen_Calibr_native example to calibrate the touch.
Applications
Touch interfaces for the Uno
Builds that use it
Alternatives
- 2.8 inch TFT touch (ILI9341, SPI)SPI version that frees pins
- ESP32 2.8 inch display board (CYD, ESP32-2432S028)Screen and ESP32 in one
Common questions
What is the 2.4 inch TFT shield for Arduino Uno used for?
In maker projects: touch interfaces for the Uno.
How does the 2.4 inch TFT shield for Arduino Uno work?
A 240 × 320 TFT on an 8-bit parallel bus with a resistive touch layer.
What voltage does the 2.4 inch TFT shield for Arduino Uno need?
5 V via the shield.
How do I connect the 2.4 inch TFT shield for Arduino Uno to an Arduino or ESP32?
8-bit parallel. Pins: D2 to D9 (8-bit data bus), A0 to A4 (Control), D10 to D13 (SD card), Touch (Shares analog and data pins).
What can I use instead of the 2.4 inch TFT shield for Arduino Uno?
2.8 inch TFT touch (ILI9341, SPI) and ESP32 2.8 inch display board (CYD, ESP32-2432S028).
