Idea
In short
How do you build a hand-crank generator?
Spin a small toy motor by hand, or with a rubber band and a wheel, and watch two LEDs wired in opposite directions light as it makes electricity. A meter shows the voltage rise with speed. It shows how a motor and a generator are the same machine. You need DC motor 130 size (toy motor), LED 5 mm red × 2, Resistor 220 Ω × 2, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 50 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make electricity by spinning a motor.
Parts list
- Motors & Actuators
- SemiconductorsLED 5 mm red × 2
- PassivesResistor 220 Ω × 2
- Tools & Instruments
- Prototyping
How to build it
- Spin the motor by hand
- Light an LED through a resistor
- Add a second LED the other way round
- Measure the voltage at three speeds
- Reverse the spin and see which LED lights
Common questions
What parts do I need for the hand-crank generator?
DC motor 130 size (toy motor), LED 5 mm red × 2, Resistor 220 Ω × 2, Digital multimeter and Breadboard 830 Tie Points.
How long does the hand-crank generator take to build?
About 50 minutes for a beginner maker.
