Projects / Ideas / Height and heading logger

Height and heading logger

IntermediateSensorsIdeaReviewed
In short

How do you build a height and heading logger?

A ten-axis board gives pressure height and compass heading together, logged while you walk up a staircase and turn corners. You need Arduino Nano, GY-87 10DOF IMU module, MicroSD Card Module, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Log height and heading.

How to build it

  1. Scan the three chips
  2. Read pressure and heading
  3. Add a zero button
  4. Log both to the card
  5. Plot a walk

Related projects

Common questions

What parts do I need for the height and heading logger?

Arduino Nano, GY-87 10DOF IMU module, MicroSD Card Module, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the height and heading logger take to build?

About 210 minutes for a intermediate maker.