Components / Sensors / GY-87 10DOF IMU module

GY-87 10DOF IMU module

MPU6050, HMC5883L and BMP180 on one board.

MeasuresAcceleration, rotation, magnetic field, pressure
InterfaceI2C
Supply voltage3 to 5 V
SensorsReviewedMPN GY-87Used in 2 projects
GY87
In short

What is the GY-87 10DOF IMU module and what is it used for?

MPU6050, HMC5883L and BMP180 on one board. Makers use it for drone flight controllers.

How it works

Several sensors on one board sharing the I2C bus.

Key specifications

Sensor specValue
MeasuresAcceleration, rotation, magnetic field, pressure
InterfaceI2C
Supply voltage3 to 5 V

Pinout

VCC3.3 to 5 V
GNDGround
SCLI2C clock
SDAI2C data
INTAMPU6050 interrupt
DRDYCompass data ready
FSYNCFrame sync

How to use it

It carries an MPU6050, a compass (HMC5883L or QMC5883L) and a BMP180. The compass sits behind the MPU6050, so enable the MPU6050's I2C bypass before reading it.

Applications

Alternatives

Buy at

Common questions

What is the GY-87 10DOF IMU module used for?

In maker projects: drone flight controllers.

How does the GY-87 10DOF IMU module work?

Several sensors on one board sharing the I2C bus.

What voltage does the GY-87 10DOF IMU module need?

3 to 5 V.

How do I connect the GY-87 10DOF IMU module to an Arduino or ESP32?

I2C. Pins: VCC (3.3 to 5 V), GND (Ground), SCL (I2C clock), SDA (I2C data), INTA (MPU6050 interrupt), DRDY (Compass data ready).

What can I use instead of the GY-87 10DOF IMU module?

BNO055 absolute orientation sensor.