Idea
In short
How do you build a stair altitude meter?
A pressure sensor measures the height change when you climb a flight of stairs and shows metres on a display. You need Arduino Nano, Barometric pressure sensor BMP180, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure height from pressure.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Read the pressure
- Set a zero with a button
- Climb one flight
- Read the height change
- Compare with a tape measure
Common questions
What parts do I need for the stair altitude meter?
Arduino Nano, Barometric pressure sensor BMP180, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the stair altitude meter take to build?
About 120 minutes for a beginner maker.
