GUVA-S12SD UV sensor module
Analog UV photodiode module.
MeasuresUV 240 to 370 nm
InterfaceAnalog
Supply voltage2.5 to 5 V
SensorsReviewedMPN GUVA-S12SDUsed in 3 projects
In short
What is the GUVA-S12SD UV sensor module and what is it used for?
Analog UV photodiode module. Makers use it for UV index meters.
How it works
A gallium nitride photodiode responds to 240 to 370 nm ultraviolet light, with an amplifier on the module.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | UV 240 to 370 nm |
| Interface | Analog |
| Supply voltage | 2.5 to 5 V |
Pinout
VCC2.5 to 5 V
GNDGround
OUTAnalog, rises with UV
How to use it
Read OUT with analogRead. A rough UV index is the output voltage in millivolts divided by 100, but check against a reference meter if you report it.
Applications
UV index meters
Builds that use it
Alternatives
- LTR390 UV sensorDigital I2C UV sensor
Common questions
What is the GUVA-S12SD UV sensor module used for?
In maker projects: UV index meters.
How does the GUVA-S12SD UV sensor module work?
A gallium nitride photodiode responds to 240 to 370 nm ultraviolet light, with an amplifier on the module.
What voltage does the GUVA-S12SD UV sensor module need?
2.5 to 5 V.
How do I connect the GUVA-S12SD UV sensor module to an Arduino or ESP32?
Analog. Pins: VCC (2.5 to 5 V), GND (Ground), OUT (Analog, rises with UV).
What can I use instead of the GUVA-S12SD UV sensor module?
LTR390 UV sensor.
