Idea
In short
How do you build a mobile air quality survey?
A backpack unit logs PM2.5, CO2 and GPS while walking and maps pollution. You need ESP32 DevKit V1, PMS5003 particulate matter sensor, SCD40 CO2 sensor, GPS module NEO-6M, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10) and Li-Po battery 3.7 V 2000 mAh.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Map pollution.
Parts list
- Development Boards
- Sensors
- Sensors
- Sensors
- Interfaces
- SBC Accessories
- Batteries
How to build it
- Log every 5 seconds
- Add location
- Build a heat map
- Compare roads and parks
- Calibrate against a reference
Common questions
What parts do I need for the mobile air quality survey?
ESP32 DevKit V1, PMS5003 particulate matter sensor, SCD40 CO2 sensor, GPS module NEO-6M, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10) and Li-Po battery 3.7 V 2000 mAh.
How long does the mobile air quality survey take to build?
About 480 minutes for a advanced maker.
