Idea
In short
How do you build a handheld methane walkover logger?
A handheld unit logs methane and GPS while walking over a landfill or marsh. You need ESP32 DevKit V1, MQ-4 methane sensor module, GPS module NEO-6M, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10) and SSD1306 OLED Display.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Survey gas with location.
Parts list
- Development Boards
- Sensors
- Sensors
- Interfaces
- SBC Accessories
- Displays
How to build it
- Warm up
- Log gas and location
- Show hotspots on a map
- Calibrate against a known source
- Use only in safe areas
Common questions
What parts do I need for the handheld methane walkover logger?
ESP32 DevKit V1, MQ-4 methane sensor module, GPS module NEO-6M, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10) and SSD1306 OLED Display.
How long does the handheld methane walkover logger take to build?
About 240 minutes for a intermediate maker.
