Idea
In short
How do you build a velocity-sensitive drum pad?
A force-sensitive resistor under a rubber pad makes MIDI drum notes with volume that depends on how hard you hit. You need Raspberry Pi Pico H, Force sensitive resistor FSR 402 × 4, Resistor 10 kΩ × 4, Piezo disc buzzer element and USB A to micro-USB cable (data).
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure a quick peak from a force sensor and send MIDI.
Parts list
- Development Boards
- Sensors
- PassivesResistor 10 kΩ × 4
- Motors & Actuators
- Cables & Wires
How to build it
- Wire each FSR as a divider
- Sample all four at high speed
- Find the peak after each hit
- Map peak to MIDI velocity
- Send notes over USB MIDI
Common questions
What parts do I need for the velocity-sensitive drum pad?
Raspberry Pi Pico H, Force sensitive resistor FSR 402 × 4, Resistor 10 kΩ × 4, Piezo disc buzzer element and USB A to micro-USB cable (data).
How long does the velocity-sensitive drum pad take to build?
About 150 minutes for a intermediate maker.
