Idea
In short
How do you build a pico I2S audio player?
A Pico plays WAV files from an SD card through an I2S amplifier, a clean digital audio path. You need Raspberry Pi Pico H, MAX98357A I2S amplifier breakout, MicroSD Card Module, Speaker 4 Ω 3 W and Tactile push button 6 mm × 3.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use I2S for digital audio output.
Parts list
- Development Boards
- Audio
- Interfaces
- Motors & Actuators
- Switches
How to build it
- Wire I2S with BCLK, LRC and DIN
- Read a WAV file from the card
- Stream samples to the amplifier
- Add play, next and volume buttons
- Check the sample rate matches
Common questions
What parts do I need for the pico I2S audio player?
Raspberry Pi Pico H, MAX98357A I2S amplifier breakout, MicroSD Card Module, Speaker 4 Ω 3 W and Tactile push button 6 mm × 3.
How long does the pico I2S audio player take to build?
About 150 minutes for a intermediate maker.
