Idea
In short
How do you build a solar hot water heat meter?
Flow and two temperatures give the heat a solar water heater collects. You need ESP32 DevKit V1, Water flow sensor YF-S201, DS18B20 waterproof probe × 2, Resistor 4.7 kΩ and SSD1306 OLED Display.
- Level
- Advanced
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compute energy from flow and temperature difference.
Parts list
- Development Boards
- Sensors
- Sensors
- Passives
- Displays
How to build it
- Measure flow in litres per minute
- Measure inlet and outlet temperature
- Energy = flow × 4.18 × ΔT
- Add up kWh per day
- Show the daily total
Common questions
What parts do I need for the solar hot water heat meter?
ESP32 DevKit V1, Water flow sensor YF-S201, DS18B20 waterproof probe × 2, Resistor 4.7 kΩ and SSD1306 OLED Display.
How long does the solar hot water heat meter take to build?
About 240 minutes for a advanced maker.
