Idea
In short
How do you build a paint colour matcher?
An 11-channel spectral sensor reads the colour of a painted wall under its own lamp and shows the closest named paint from a list. You need ESP32 DevKit V1, AS7341 11-channel spectral sensor, SSD1306 OLED Display, High-power LED 1 W white (star), BC547 NPN transistor and Resistor 330 Ω.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare a measured spectrum with a table of known colours.
Parts list
- Development Boards
- Sensors
- Displays
- Optoelectronics
- Semiconductors
- Passives
How to build it
- Read all spectral channels with the lamp on
- Normalise against a white card
- Store reference spectra for several paints
- Pick the nearest match
- Show the colour name and a similarity percentage
Common questions
What parts do I need for the paint colour matcher?
ESP32 DevKit V1, AS7341 11-channel spectral sensor, SSD1306 OLED Display, High-power LED 1 W white (star), BC547 NPN transistor and Resistor 330 Ω.
How long does the paint colour matcher take to build?
About 180 minutes for a intermediate maker.
