Projects / Ideas / Fingerprint practice reader

Fingerprint practice reader

IntermediateSecurityIdeaReviewed
In short

How do you build a fingerprint practice reader?

A fingerprint module enrols and matches your own finger to open a toy box or show a friendly name. Only enrol your own finger, and treat it as a learning demo. You need Arduino Nano, Fingerprint sensor R307, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Learn how fingerprint matching works.

Parts list

How to build it

  1. Wire the module on serial
  2. Enrol one finger
  3. Match it
  4. Show the match score
  5. Delete the data when done

Related projects

Common questions

What parts do I need for the fingerprint practice reader?

Arduino Nano, Fingerprint sensor R307, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the fingerprint practice reader take to build?

About 270 minutes for a intermediate maker.