Projects / Ideas / Fingerprint unlock demo

Fingerprint unlock demo

IntermediateSecurityIdeaReviewed
In short

How do you build a fingerprint unlock demo?

A fingerprint sensor enrolls a few fingers and lights a green LED for a known finger. This is a learning demo, not a security product. You need Arduino Nano, Fingerprint sensor R307, LED 5 mm red, LED 5 mm green, Resistor 220 Ω × 2 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use a fingerprint sensor module.

Parts list

How to build it

  1. Wire the sensor on serial
  2. Enroll fingers
  3. Search on touch
  4. Show match or no match
  5. Discuss why this is a demo only

Related projects

Common questions

What parts do I need for the fingerprint unlock demo?

Arduino Nano, Fingerprint sensor R307, LED 5 mm red, LED 5 mm green, Resistor 220 Ω × 2 and Breadboard 830 Tie Points.

How long does the fingerprint unlock demo take to build?

About 240 minutes for a intermediate maker.