Fingerprint sensor R307
Optical fingerprint module that stores and matches fingerprints itself.
What is the Fingerprint sensor R307 and what is it used for?
Optical fingerprint module that stores and matches fingerprints itself. Makers use it for attendance and door locks.
An optical sensor captures the ridge pattern and its own processor extracts and matches features.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Fingerprints (stores about 1000) |
| Interface | UART 57600 baud |
| Supply voltage | 4.2 to 6 V |
| Watch out for | Store fingerprints responsibly and get consent |
Pinout
How to use it
Use the Adafruit Fingerprint library at 57600 baud. Enrol each finger twice. Store only the template IDs on your system, ask for consent, and allow people to delete their data.
Applications
Builds that use it
Alternatives
- AS608 fingerprint sensorSmaller module using the same command set
Common questions
What is the Fingerprint sensor R307 used for?
In maker projects: attendance and door locks.
How does the Fingerprint sensor R307 work?
An optical sensor captures the ridge pattern and its own processor extracts and matches features.
What voltage does the Fingerprint sensor R307 need?
4.2 to 6 V.
How do I connect the Fingerprint sensor R307 to an Arduino or ESP32?
UART 57600 baud. Pins: 5V (Supply (red)), GND (Ground (black)), TXD (UART out (3.3 V logic)), RXD (UART in), Touch and 3.3V (Finger detect wires on some versions).
What can I use instead of the Fingerprint sensor R307?
AS608 fingerprint sensor.
