Idea
In short
How do you build a feather ESP32-S3 touch wake counter?
An Adafruit Feather ESP32-S3 sleeps until a touch pad is tapped, counts the taps in memory that survives deep sleep and shows the total over serial. Powered over USB only. You need Adafruit Feather ESP32-S3, Touch sensor module (TTP223) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 130 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn touch wake-up from deep sleep.
Parts list
- Development Boards
- Sensors
- Prototyping
How to build it
- Wire the touch module
- Set it as the wake source
- Count each wake in RTC memory
- Return to deep sleep
- Print the total on request
Common questions
What parts do I need for the feather ESP32-S3 touch wake counter?
Adafruit Feather ESP32-S3, Touch sensor module (TTP223) and Breadboard 830 Tie Points.
How long does the feather ESP32-S3 touch wake counter take to build?
About 130 minutes for a intermediate maker.
