Idea
In short
How do you build a device fleet on ThingsBoard?
Several sensors report to ThingsBoard, which shows them on a map with alarms and history. You need ESP32 DevKit V1 × 3, DHT22 Sensor × 3, Resistor 10 kΩ × 3 and GPS module NEO-6M.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Manage many devices on an IoT platform.
Parts list
- Development BoardsESP32 DevKit V1 × 3
- SensorsDHT22 Sensor × 3
- PassivesResistor 10 kΩ × 3
- SensorsGives each device a map position
How to build it
- Create devices and access tokens
- Send telemetry over MQTT
- Build a dashboard with a map
- Set alarm rules
- Share a read-only view
Common questions
What parts do I need for the device fleet on ThingsBoard?
ESP32 DevKit V1 × 3, DHT22 Sensor × 3, Resistor 10 kΩ × 3 and GPS module NEO-6M. GPS module NEO-6M: Gives each device a map position.
How long does the device fleet on ThingsBoard take to build?
About 180 minutes for a intermediate maker.
